Renowned references speak for themselves

You too can rely on the experience and competence of Wälischmiller Engineering.

Amec Foster Wheeler plc.

Technische Universität München


Amec Foster Wheeler plc.

ÚJV Řež, a. s.

NTP Radioisotopes SOC Ltd


Physikalisch-Technische Bundesanstalt (PTB)

Mitsui E&S Machinery Co., Ltd.

Sellafield Ltd.


Eilif Nerland (LBO) on TELBOT® Classic ATEX, 2012:

„The tank inspection project during this year shutdown at Nyhamna was successful. Shell is very pleased and impressed of the work performed by Wälischmiller, LBO and Maintech.

We got access to the first tank 15 hours behind of plan but we were able to finish our work ahead of plan. Your achievement and equipment has been noticed by the Shell organization.“

Peter Allport (Sellafield Ltd.) on TELBOT, 2016:

„It’s an incredible piece of machinery. When a human picks up a cup of coffee, it involves a series of twists and moves that you don’t even think about in your wrist, arm, shoulder and back. The TELBOT robotic arm can mimic all that so it flows, but it can also be programmed to repeat manoeuvres so tasks are performed thousands of times with less than 2mm of variation.“

Thomas Eberhard (Kerntechnische Entsorgung Karlsruhe GmbH) on TELBOT, 2016:

„We are operating on the assumption that with the new test rig we can minimise the risks of dismantling and increase planning safety.“

Emilio Bergerre (IRE) on A200 and A100 telemanipulators, 2018:

„Wälischmiller supplied A200 and A100 to IRE for our processing cells. The availability and service from HWM staff is excellent and our concerns were competently and professionally addressed. We are very happy to recommend Wälischmiller Engineering as providers of and specialists in manipulators and robots.“

Daniel Friedrich (Kerntechnische Entsorgung Karlsruhe GmbH) on Wälischmiller, 2018:

„For many years now we have enjoyed a close collaborative working relationship with Wälischmiller. In the technical sector we can rely on the expertise of HWM at any time and can always rely on their support in the implementation of projects.“

Mik Dausi (SCK CEN, Belgium) on the A1000:

„I was involved with HWM during the installation of a power manipulator in one of our hot cells. The installation had to take place in a hot cell that had existed for several decades, making the interface between this new manipulator and the already existing structures and installations one of the main challenges. Another important challenge was the time frame. Throughout the entire project HWM handled every aspect very professionally. All communications and actions happened very quickly. Even the installation phase went without a hitch and we are very proud of our very capable power manipulator!“

Contact person

Jean-Michel Wagner

Jean-Michel Wagner

P.A. of the Management / Marketing